Oral B irrigator maintenance: How to clean and care for it to extend its life

Oral-B irrigators are from first quality. However, not performing proper maintenance will mean that in a few months they stop working.

Do you want to avoid it? We explain how to clean and maintain your irrigator in perfect condition so that it has a long useful life.

General Cleaning Procedures for the Oral B Water Flosser

At this point we are going to see the routine maintenance that you should perform on your Oral-B irrigator:

Deposit

after each use you must dry it with a dry cloth, in addition to preventing water from remaining inside. Otherwise, layers of mold can form, or bacteria and germs accumulate.

To the least once a weekbe sure to clean the tank with soap and water. if you have used mouthwashyou will have to clean it thoroughly, to remove any remains.

irrigator and handle

Once a week It is advisable wipe it with a damp cloth to remove any remaining dust, drying it with a dry cloth.

If he tank is removableTake the opportunity to clean the cavity following the same procedure.

Other care for good maintenance of the Oral B dental irrigator

The advice that we are going to give you next you should use at least once a monthto clean the interior parts of the irrigator:

Tank cleaning

Fill the water tank with water (up to the maximum) and 4 tablespoons of vinegar. If the irrigator is cordless, use only two tablespoons.

Empty half the tank by shooting the stream into the sink. Let the mixture act for 20 minutes and repeat the process.

To remove traces of vinegar, refill the water tank and empty it.

This method can also be done with sodium bicarbonate.

heads and handle

To clean the interior of these parts, immerse them in a container with white vinegar with water (4 tablespoons of vinegar with water) for 15 minutes.

After wash them with soap and water, and dry them well before using them again.

You may also like